Recently, the company’s deputy general manager Long Decong went to the comprehensive maintenance class of the alloy business department to carry out warning education, and guided the revision of the safety operation regulations for crane, belt operation and maintenance positions.Based on accident cases, Long Decong deeply analyzed the causes of 3 crane accidents and 3 belt accidents that occurred in Chinalco’s subsidiaries in recent years, and again summarized the safety risks exposed by several accidents.Through analysis, every safety accident reminds us that in daily lifting operations, we must strictly follow the crane operating rules and regulations, and strictly abide by the “ten no cranes” when driving.
During the hoisting operation, the surrounding personnel should keep a safe distance from the hoisted goods, so that mutual guarantee and joint guarantee supervision are in place, and strict warning signs are required.During the overhaul process, the rotating equipment can be shut down, tested for electricity, installed grounding wires, hanged signs, and installed barrier protection devices in advance before starting work.At the same time, it also pointed out that the maintenance personnel strictly implement the work ticket, work permit, guardianship, interruption, transfer and termination system in the daily maintenance work.
Subsequently, Long Decong guided the revision and improvement of the safety operating procedures for crane, belt operation and maintenance posts.Long Decong put forward a requirement that during the operation process, equipment must be overhauled and maintained in strict accordance with the implementation of safety operating procedures, and production staff must be guided to work in accordance with the regulations, putting safety first; strictly implement the life-saving measures of “three goals and two must” to eliminate “people” “Unsafe behaviors, unsafe conditions of objects, and management defects” are the three major causes of accidents; strengthen the inspection and maintenance of equipment, make minor reforms, investigate and rectify hidden dangers, and strictly prohibit the equipment from running with diseases to ensure the safety and stability of the equipment Operate to ensure safe production; strengthen training and improve employee safety awareness, so that everyone pays attention to safety, everyone is a safety officer, always keeps safety in mind, and “all risks can be controlled and all accidents can be prevented” Practice it in actual management work.
Link to this article：Long Decong, deputy general manager of Yunlu Haixin, went to the alloy business department to carry out safety warning education and safety work guidance
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks！^^
