Deprecated: get_settings is deprecated since version 2.1.0! Use get_option() instead. in /www/sites/alloy.wiki/index/wp-includes/functions.php on line 4862
1 Scope This standard specifies the types and dimensions of tongue and groove steel pipe flange covers with nominal pressures PN of 1.6, 2.5, 4.0, 6.3, 10.0, 16.0MPa and nominal pressures PN of 5.0, 11.0, 15.0, 26.0MPa. This standard is applicable to tongue and groove steel pipe flange covers with nominal pressures PN1.6~PN26.0MPa.
2 Referenced standards The provisions contained in the following standards constitute provisions of this standard by being quoted in this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties using this standard should explore the possibility of using the latest version of the standard listed below. GB/T 9112—2000 Steel pipe flanges Types and parameters GB/T 9124—2000 Steel pipe flanges Technical conditions
3 Types and dimensions of flange covers 3.1 The types of flange covers for PN1.6, PN2.5, PN4.0, PN6.3, PN10.0 and PN16.0MPa tongue and groove steel pipes shall comply with the requirements of Figure 1. The dimensions should comply with the requirements in Tables 1 to 6.
3.2 The type of PN5.0, PN11.0, PN15.0 and PN26.0MPa tongue and groove steel pipe flange covers shall comply with the requirements in Figure 2, and the dimensions shall comply with the requirements in Tables 7 to 10.
4 Technical requirements for flange covers 4.1 The technical requirements for flange covers should comply with the provisions of GB/T 9124.
4.2 The maximum non-impact working pressure of the flange cover at different temperatures should comply with the provisions of GB/T 9124-2000 Appendix A (standard appendix).
5 Marking 5.1 The flange cover should be marked according to the nominal diameter, nominal pressure, sealing surface type code and standard number.
5.2 The type code of the flange cover sealing surface should comply with the regulations of GB/T 9112.
5.3 Marking example: Tenon steel pipe flange cover with nominal diameter 80mm and nominal pressure 5.0MPa (50bar): Flange cover DN80-PN50 T GB/T 9123.3-2000 Nominal diameter 80mm, nominal pressure 2.5MPa (25bar) Grooved steel pipe flange cover: Flange cover DN80-PN25 G GB/T 9123.3—2000
Link to this article：What is GB9123.3-2000 tongue and groove steel pipe flange cover?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks！^^
