Home » Steel Guide » Steel World » Deformation characteristics of ordinary spinning

Deformation characteristics of ordinary spinning

Posted by: steel world 2023-10-23 Comments Off on Deformation characteristics of ordinary spinning

The deformation characteristic of ordinary spinning is that the metallic cementation slab mainly shrinks or expands in diameter during deformation. The diameter shrinkage is reduced diameter spinning, and the diameter expansion is expanded diameter spinning. The resulting wall thickness change is subordinate. Since changes in diameter can easily cause instability or local thinning, the ordinary spinning process is generally completed gradually in multiple passes (as shown in the figure).

a-simple deep drawing and spinning;

b-Multi-pass deep drawing and 16 inch spinning oxide high bay light aluminum reflector 1-slab;


3-core mold;

4-top of tail;

5-forming cyclon;

6-Trimming wheel;

7-Reverse push disk

Link to this article:Deformation characteristics of ordinary spinning

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki,thanks!^^