Abstract: Summarize some common wrong operations and solutions in pump test. The correct operation procedure that should be adopted in the performance test is also introduced by taking the open bench ...
In 08F, F means rimmed steel, 08 means carbon content is 8/10000, 08F is the grade of 1006 steel. 08F steel has very low strength and hardness, and extremely high plasticity and toughness. It has good...
According to the monitoring of the Ministry of Commerce, last week (August 9-15), the national market price of edible agricultural products rose 0.1% from the previous week (the same below), and the m...
Stimulated by the further expansion of the scale of electricity curtailment in the China Southern Power Grid, the domestic aluminum metal price once again rushed to the 2 yuan/ton mark. Aluminum price...
An investor asked Tianshan Aluminum (002532) whether the alumina from Guangxi was shipped to Xinjiang for electrolysis or sold on the spot? The company replied, hello, dear investors, the company’s al...
Some investors asked Chujiang New Materials (002171) a question, hello! Whether the company’s high-end thermal equipment research, development, production and manufacture and the solid waste pyr...
Date Yangtze River Nonferrous Shanghai Futures Nanhai Nonferrous Guangdong South Reserve Shanghai Spot Chinalco Quotation LME electronic disk 08 11 20060 20095 20510 20250 20070 20080 08 10 198...
According to the relevant regulations of the Xinjiang Uyghur Autonomous Region People’s Government “Notice on the Establishment of a Price Linkage Mechanism for the Standby Fees for Self-provide...
Product name Description Today’s price Yesterday’s price Ups and downs Date ADC12 Tax included 19100 19100 0 2021-08-19 AlSi9Cu3 Tax included 19400 19400 0 2021-08-19 A380 Tax in...
Relative Comparison Of Anodizing And Hard Oxidation Aluminum alloy and hard film Anodized film is obtained from aluminum material as anode. Aluminum alloy material has a great influence on the perform...
What is advantages for 5 axis machining? What are the differences between the three-axis, 3+2-axis, and 5-axis cnc machining solutions that we usually mention? Let me introduce you first: 3-axis machi...
, extrusion, die casting or forging, smelting and stamping. In short, the mould is a tool used to make moulding objects. ...
Appearance Film Thickness Test And Hanger Fixture Requirements PTJ Shop provides services for hard anodizing around the world, relying on excellent quality, reasonable price, perfect management, and h...
With the development of industry, various special engineering materials with high strength, high hardness, high temperature resistance and corrosion resistance are more and more used in metalworking i...
Experimental studies have shown that the resistance to melting loss of the slag splash layer is related to the TFe content in the slag splash layer. The higher the TFe content, the easier the slag spl...
9Cr18MoV steel has good rust resistance. It is a high-quality stainless steel currently used in the high-end batch tool market. Its strength and sharpness are better than ATS-34, and its chromium cont...
Patent No.: 98125048.3 Patentee: Baoshan Iron and Steel (Group) Company Technical Abstract: The present invention discloses a molten steel refining process, which belongs to the treatment method of mo...
4 F, m& ?: `2 ]$ `& F| Blue Pump Technology Forum With the development of the chemical industry and the improvement of people’s awareness of the environment and safety, the requirements for ch...
Membrane technology is a new technology that can be used flexibly. This article introduces two application cases of membrane technology in practical engineering. The water supply department of Carmich...
In continuous casting production, the limiting factor to increase the drawing speed, One is that the billet may be deformed in the secondary cooling zone and break out of the crystallization zone; The...
●Characteristics and scope of application: Note: This steel has poor weldability, so attention must be paid when using it. ●Chemical composition: Manganese Mn: ≤0.80 Sulfur S: ≤0.030 Phosphorus P: ≤0....
1 Scope This standard specifies the terminology, design and performance requirements, testing, displacement determination, equivalent displacement calculation, marking and lead sealing, quality assura...
There are many types of mechanical seals for maintenance pumps with mechanical seals, with different models, but there are mainly five leakage points: (l) the seal between the shaft sleeve and the...
Through the implementation of spheroidizing treatment, the cutting performance of this type of carbon steel can be improved. The steel is usually used after tempering to a hardness of 19~22HRC to incr...
The main train of the three-roll planetary rolling mill is divided into two parts: the rolling mill body and the transmission. The rolling mill body is composed of a slewing disk system, a central sle...
(%): Carbon: 0.8-0.9 Forging: 1.100～900℃ Annealing: Heat to 800-850°C, stay at this temperature for two to four hours, and let it cool down in the furnace. Quenching: first preheat to 550-600°C, then...
Chromium is an important strategic resource and an important raw material for the stainless steel industry. It is also widely used in refractory materials, chemicals and light industry. With the devel...
1 Current situation After the reform and opening up, with the vigorous development of China’s economic construction, the valve industry has also shown a thriving vitality. Now there are thousa...
The molten metal penetrates into the sand mold to form a mechanical mixture of metal and sand. There are two situations: one is that the molten metal penetrates into the molding sand through the crack...
Carbon (C) 0.33～0.42 Manganese (Mn) 0.55～0.75 Alum (V) 0.30～0.80 Silicon (Si) 0.80～1.20 Chromium (Cr) 4.80～5.50 Molybdenum (M0) 1.20～1.60 Phosphorus (P) ≤0.030 Sulfur ( S) 0.10～0.151. The hardness is ...
The main machining method titanium alloy parts have a relatively large machining allowance, some parts are very thin (2～3mm), and the dimensional accuracy and shape tolerances of the main mating s...
The steel ingot heating method uses the latent heat of the liquid core and its heat recovery effect to make the surface and the inside temperature of the steel ingot uniform. The specific steps are: a...
Before and after the secondary refining process, the secondary oxidation of molten steel caused problems in the production of clean steel. The ferrous oxide, manganese oxide, and silicon dioxide conta...
1. Good polishing and laser etching performance 2. Good processing performance 3. High purity and excellent uniformity 4. Better abrasion resistance, longer mold life, with the following advantages: 1...
With the improvement of people’s living standards, environmental protection awareness and health concerns, a green building materials industry has been set off in the field of water supply and d...
Compound extrusion (compound extrusion) is an extrusion method in which metal flows in two opposite directions simultaneously in the space between the extrusion rod and the extrusion barrel and the ex...