Let’s talk about hss.
What is hss?
High-speed steel (HSS) is a tool steel with high hardness, high wear resistance and high heat resistance, also known as wind steel or front steel. Even cooling in air during
hardening means hardening, and very Sharp. Also known as white steel.
High speed steel is a composite alloy steel containing carbide forming elements such as tungsten, molybdenum, chromium, vanadium and cobalt. The total amount of
alloying elements is about 10-25%. It maintains high hardness at high heat cutting (about 500 ° C) and HRC can be higher than 60. This is the most important characteristic
of high speed steel – red hardness. However, after quenching and low temperature tempering, the carbon tool steel has a high hardness at room temperature, but when the
temperature is higher than 200 ° C, the hardness sharply drops, and the hardness at 500 ° C drops to an annealing state. The ability to cut metal is completely lost, which
limits the use of carbon tool steel in cutting tools. High-speed steel makes up for the fatal shortcomings of carbon tool steel due to its good red hardness.
High-speed steel is mainly used to manufacture complex thin-edged and impact-resistant metal cutting tools, as well as high-temperature bearings and cold extrusion dies
such as turning tools, drill bits, hobs, machine saw blades and high-speed demanding dies.
Shanghai Metal Corporation is a trusted aluminum alloy, aluminum foil price, stainless steel price and stainless steel manufacturer, kinds of stainless steel in china.
For our full list of products that we offer check out our website here. Be sure to join the conversation in our LinkedIn group, Facebook, and Twitter. Try also our WeChat by scanning the QR code below.
Susan F.//SMC Editor
Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.
Link to this article：Do You Know about the Characteristics of High Speed Steel?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks！^^