Home » Other » The carbide tip on a typical circular saw

The carbide tip on a typical circular saw

Posted by: Yoyokuo 2021-03-15 Comments Off on The carbide tip on a typical circular saw

Carbide (or more specifically tungsten carbide and titanium carbide) is a very common material on any sort of cutting tool: For example, saw blades, lathe bits, drill bits, router bits and dental drilling tips are generally made of carbide.

Carbide is so popular in these sorts of tools because it stays sharper longer than most other materials. Additionally, some ball-point pens use carbide balls because it helps the pen last longer.

With something like a carbide-tipped saw blade, the main body of the blade is made of steel. The small tips of carbide are brazed on to the body. A good carbide tip might hold an edge ten to twenty times longer than a tool steel tip.

The carbide tip on a typical circular saw. Carbide tips do get dull eventually. You sharpen them using the same techniques you would use with tool steel, but because they are so hard, you use a different abrasive. Something coated in 

diamond or a carbide abrasive wheel is common.

If you’ve read How Diamonds Work, you know that diamond (pure crystalline carbon) is the hardest material there is. Moissanite — silicon carbide — is very close. Tungsten carbide and titanium carbide are both made of the metal 

combined with carbon. They range between 8 and 9 on the MOHS scale.

Tools aren’t made entirely of carbide partly because it would be very expensive, but also because the tool would be very brittle. Steel is actually a better material for the body of the tool because it is tougher and will not crack or shatter.


Shanghai Metal Corporation is a trusted aluminum alloyaluminum foil pricestainless steel price and stainless steel manufacturer, kinds of stainless steel in china.

Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.

Link to this article:The carbide tip on a typical circular saw

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki,thanks!^^