Home » Cnc Machining Guide » Aluminum Anodizing Sealing Process

Aluminum Anodizing Sealing Process

Posted by: Zhou HanPing 2021-10-21 Comments Off on Aluminum Anodizing Sealing Process

Aluminum Anodizing Sealing Process


The aluminum oxide film is a porous film. Regardless of whether it is colored or not, it must be sealed before being put into use, so as to improve its corrosion resistance and weather resistance.

Aluminum Anodizing Sealing Process
Aluminum Anodizing Sealing Process

There are three types of treatment methods, namely high temperature hydration reaction sealing, inorganic salt sealing and organic sealing.

(1) High temperature water seal

This method uses the hydration reaction of aluminum oxide film and water to change the amorphous film into a hydrated crystalline film:

The hydration reaction can be performed at normal temperature and high temperature, but at high temperature, especially at the boiling point, the resulting hydrated crystalline film is a very stable and irreversible crystalline film. Therefore, the most commonly used aluminum oxide film sealing treatment is boiling water. Process or steam process.

(2) Sealed by inorganic salt

The inorganic salt method can improve the fastness of organic coloring dyes, so it is commonly used in chemical coloring methods.

  • 1. Acetate method
  • 2. Silicate method

(3) Organic closed method

This is to immerse the aluminum oxide film by oil immersion, varnishing, or painting, etc., because the cost is higher and the process is increased, it is not widely used. Most of the two methods are used, and the first high temperature Hydration is mainstream.

Link to this article: Aluminum Anodizing Sealing Process

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/,thanks!


Aluminum Anodizing Sealing ProcessPTJ® provides a full range of Custom Precision cnc machining china services.ISO 9001:2015 &AS-9100 certified. 3, 4 and 5-axis rapid precision CNC machining services including milling, turning to customer specifications,Capable of metal & plastic machined parts with +/-0.005 mm tolerance.Secondary services include CNC and conventional grinding, drilling,die casting,sheet metal and stamping.Providing prototypes, full production runs, technical support and full inspection.Serves the automotiveaerospace, mold&fixture,led lighting,medical,bicycle, and consumer electronics industries. On-time delivery.Tell us a little about your project’s budget and expected delivery time. We will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Link to this article:Aluminum Anodizing Sealing Process

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki,thanks!^^