Home » Cnc Machining Guide » The Difference Between Mechanical Keyboard Shaft

The Difference Between Mechanical Keyboard Shaft

Posted by: Zhou HanPing 2021-11-14 Comments Off on The Difference Between Mechanical Keyboard Shaft

As more and more people love e-sports, people have higher and higher requirements for mechanical keyboards. For example, mechanical keyboards have become the first choice of many users. These mechanical keyboards are divided into mechanical keyboard axes with many colors. Some people can’t help but ask what is the difference between these mechanical keyboard axes?

The Difference Between Mechanical Keyboard Shaft

Our common mechanical keyboard Shaft on the market is mainly divided into four types: red shaft, black shaft, tea shaft and green shaft. Below we will analyze the difference of mechanical keyboard shaft from these four in detail.

  • 1. Black Shaft: The black shaft is known as the most primitive and purest mechanical shaft, with an ultra-short trigger distance and the longest service life. The mechanical sense is straightforward: when you press down from the top to the bottom, it presents a linear sense of pressure, so there is no need to press to the bottom. The pressure of the entire control switch is generally concentrated in the middle, and the “bottoming” is at the bottom of the key, so the MX black shaft is generally used as a keyboard for games, making it easy to double-click the keyboard. However, the shaft design of this keyboard is integral. When a key is pressed, the shaft of the entire keyboard is pressed down, so the mechanical keyboard with black shaft is not very good when typing.
  • 2. The Red Shaft: born in the co-production of female friends, it has a lighter force, the same as the plastic part of the black shaft, straight up and down straight and refreshing and natural, the entrance may feel that it is relatively slippery. In addition, the pressure in grams is smaller than that of the black shaft, starting from 35 and ending at 60 (the black shaft starting point is 40). It is a new shaft released in 2008. It feels lighter and has no sense of passage when tapping. It goes straight up and down and triggers the key. The distance is also 2.0mm, which makes it easier to strike.
  • 3. Tea Shaft: The tea shaft is the most comprehensive. The paragraph sense is not as obvious as the green shaft below. The finger feels very comfortable and the strength is moderate. It is suitable for a variety of environments. It is good for games or typing. The tea shaft is the shaft body closest to the membrane keyboard. Although there are paragraphs, it is not obvious. At the same time, the trigger pressure is also lighter. If you are just transitioning from the membrane keyboard, the tea shaft is more suitable. At the same time, the inconspicuous sense of paragraph also makes the sound when pressing is smaller than the green shaft.
  • 4.Green Shaft: the strongest sense of paragraph, the loudest Click sound, and the strongest mechanical sense. It is the representative shaft of the mechanical keyboard. It needs to be pressed down 2.4mm to trigger. The typing is full of rhythm, but the sound is louder, noisy, and the pressure is weak. The number is 60g. It is the most coquettish shaft. The sound is clear and resembles a paddle switch. The button is triggered only when the sound sounds. Therefore, it cracks when typing. It is very satisfying whether it is fingertips or psychologically. It is especially suitable for text work. By.

The above is about the mechanical keyboard shaft difference. At the same time, I believe that everyone who loves mechanical keyboards also knows how to choose the right mechanical keyboard. PTJ Hardware is a supplier of professional Cnc Machining metal keyboards, please contact us if you need them.

Link to this article:The Difference Between Mechanical Keyboard shaft

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/,thanks!


The Difference Between Mechanical Keyboard Shaft3, 4 and 5-shaft precision CNC machining services for aluminum machining, beryllium, carbon steel, magnesium, titanium machining, Inconel, platinum, superalloy, acetal, polycarbonate, fiberglass, graphite and wood. Capable of machining parts up to 98 in. turning dia. and +/-0.001 in. straightness tolerance. Processes include milling, turning, drilling, boring, threading, tapping, forming, knurling, counterboring, countersinking, reaming and laser cutting. Secondary services such as assembly, centerless grinding, heat treating, plating and welding. Prototype and low to high volume production offered with maximum 50,000 units. Suitable for fluid power, pneumatics, hydraulics and valve applications. Serves the aerospace, aircraft, military, medical and defense industries.PTJ will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Link to this article:The Difference Between Mechanical Keyboard Shaft

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki,thanks!^^